Insulated Foot Plate SHB F 80
Integrated footplate and permeable rubber compound mat to provide a solution for the support of building services, without the need for penetrative supports. In combination with the Sikla siFramo TP F 80 section, any frame structure may be built up from the footplates.
Especially suitable for maintaining the thermal and waterproofing integrity of a roof or basement floor as no penetrative fixings are required to secure the footplates for service supports.
Assembly to Beam Section TP F 80 by means of 4 Self Forming Screws FLS F.
| Statical E-module:|| According to|
0.8 - 0.9 N/mm2
| Dynamical E-module:|| According to|
0.6 - 2.2 N/mm2
| Compression set:|| DIN 53572|| approx. 4.0 % measured 30 min. |
after release at 50 % compression /
23°C after 72 Std.
| Tensile strength:|| DIN 53571|| 0.40 N/mm2 min.|
| Ultimate elongation:|| DIN 53571|| 70 % minimum value|
| Tear strength:|| DIN 53515|| 3.4 N/mm2 minimum value|
| Fire resistance:|| DIN 4102||B2|
Tests to determine the static friction coefficient shall be carried out by the customer. Depending on the used roofing film the customer has to decide if an additional separation layer (e.g. fleece) is necessary. Furthermore the statics have to be verified by a qualified engineer.
Further dimensions of SHB F 80-220 see End Support WBD F 80.
| Material:||Steel, HCP, rubber-compound material|