Tie Rod STR HCP
Tie Rods cater for the lateral forces applied to Support Brackets. Such lateral forces always occur when pipes are laid, in particular when sliding elements are fixed onto Support Brackets, and must be safely absorbed by means of Tie Rods fixed to the brackets.
Otherwise the Support Brackets run the accute risk of being pulled out of their anchoring components by the forces exerted.
Fix the Tie Rod to the bore especially made for such purpose at the overhanging leg of the Support Bracket using the recommended hexagon bolt (see table).
| Type|| Recommended bolt for |
attachement to Support Bracket
| Permissible load |
(tension and pressure)
| Installation |
|300/200||M10 x 80||7.0 kN|| 210|
|550/350||M10 x 80||7.0 kN|| 365|
|725/400||M10 x 100||12.0 kN|| 400|
|880/550||M10 x 100||12.0 kN|| 550|
| Material:|| Cold-worked tube DIN 2448, HCP|