Structural Elements 120
Assembly Set MS 5P MA
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.
Scope of delivery
| Type|| Beam Clip|
| Support plate|
| Stop plate|
| HR trimming *|
|M12 MA S||4 x M12||4 x M12||4 x M12|| 4 x M12 x 80|
|M16 MA S||4 x M16||4 x M16||4 x M16||4 x M16 x 100|
* HR trimming according EN 14399-3 consisting of: Hexagon bolt M12 or M16, 2 washers, 1 hexagon nut
| 1.|| Position stop plate on component to be mounted.|
| 2.|| Position the Beam Clip with the slit side into the indentations of the stop plate and with the lug on the steel girder.|
| 3.|| Install support plate and HR trimming and tighten accordingly.|
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the HR trimming a continuous and predictable preload force is guaranteed. The stop plate ensures a tight fit of the Beam Clip.
| Type|| Size range|
| Tightening torque MA|
plus 90° revolution
| Fy permitted|
per Beam Clip
| Shear force load capacity Fz|
per Set = 4 Beam Clips
|M12 MA S||1 - 30||60 / 90°||32.9|| 15.1 *|
|M16 MA S||4 - 40||140 / 90°||39.1||16.7 *|
* The specified data relate to the worst case with flange thicknesses 30 mm (M12) or 40 mm (M16) as well as a coefficient of adhesion µadhesion = 0.20.
A possibly operating tensile force Fy isn't included.
| Material:||Steel, HCP|