Pipe Shoe LC - HV HT



Application
Pipe Shoe - Double Clamp for pipes on suitable surfaces. Height-adjustable in steps of 2.5 mm. When resting on steel beams, a minimum flange width of 80 mm is recommended.
These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures.
Scope of delivery
Upper and lower part are bolted together allowing height adjustment.
Technical Data
Type | Height H as delivered [mm] | Height H Range [mm] |
---|---|---|
LC - HV 90 | 90 | 88,5 ... 113,5 |
LC - HV 150 | 150 | 116 ... 168,5 |
LC - HV 200 | 200 | 171 ... 223,5 |
Tightening torque screw connections:
Clamping bolts | tightening torque [Nm] | height adjustment | tightening torque [Nm] |
---|---|---|---|
DN 15 - 40 | 40 | bolts in the bar | 80 |
DN 50 - 200 | 50 | bolts in the bar | 80 |
DN 250 - 300 | 60 | bolts in the bar | 80 |
Dimensions: | |
Metal plate: | L = 250 mm x B = 100 mm |
Material: | |
Metal plates: | 16Mo3, electro-galvanised |
Bolts, Nuts: | A4-80 |
Media temperature tf : | 300°C to 500°C |
Approvals / Conformity
Pipe Shoe - external monitoring PDF | 606.8 KB Overview all Pipe Shoes LC - HV HT PDF | 201.2 KB
Further clamping ranges listed in the attached "PDF-Overview" all pipe shoes.
Note: Pipe shoes HV 200 and outside the DN range - minimum quantity and delivery time on request.